Brand : Rego
Manufacturer Name : Rego
- Designed especially for liquid transfer of LP-Gas from consumer bulk storage containers when used with a Chek-Lok or equipped with an integral excess flow valve. May also be used for vapor LP-Gas service. In NH3 applicator tanks they may be used as a vapor bleeder valve or as a liquid withdrawal valve when installed in a coupling with a dip pipe. These liquid transfer valves are equipped with an integral excess flow valve for liquid transfer directly from the tank fitting, or without an integral excess flow for LP-Gas transfer through a Check-Lok valve. When equipped with an integral excess flow valve (7550PX), the valve should be mounted in a forged steel 3000 lb. half coupling. When mounted in a 1 1/4” x3/4” NPT reducing coupling, the3/4” female thread in this coupling must be full length-equivalent to a forged steel 3000 lb. half coupling. The excess flow valve will not function properly if these specifications are not met. Refer to the Warning Bulletin in the Excess Flow Valve Section of this catalog.
- Flange seal stem design provides for leak-proof operation. No packing to retighten or replace
- Large, unrestricted interior ports reduce pressure drop through the valve, increasing capacity and preventing cavitation
- Resilient swivel seat disc ensures longer seat life and easy, positive shut-off
- Plugged 1/4” NPT outlet boss accommodates hydrostatic relief valve or vent valve
- Specifically designed for liquid transfer of LP-Gas with the Chek Lok
- Temperature range of -40 Degree F to +165 Degree F. (-40 Degree C to +73 Degree C)
- MAWP: 400 PSIG(27 Bar)
- stylecontent